Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Mobile Voice Access

When configuring Mobile voice access, after I follow the configuration, and I try to dial the number that I assigned for mobile access i get the following error

108282: Jul 10 20:04:56.200: %CALL_CONTROL-6-APP_NOT_FOUND: Application cmm in dial-peer 4143 not found. Handing callid 115013 to the alternate app .

108283: Jul 10 16:04:56.212: ISDN Se0/3/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x9B6A

Cause i = 0x80BF - Service/option not available, unspecified

Does anybody knows where to get from the VXM script for this application?

thanks

2 REPLIES
Silver

Re: Mobile Voice Access

This may be because the inbound dial peer is pointing to an unavailable application. The call is being handed to the alternate application or is rejected. So try to reconfigure the dial peer to have a valid application name, or verify that the application is accessible at its location.

Community Member

Re: Mobile Voice Access

Yes. You were right.

had a typo on my dial-peer config…

I had configured

application

service ccm http://10.120.1.11:8080/ccmivr/pages/IVRMainpage.vxml

!

My dial peer config was

dial-peer voice 4143 pots

description incoming d-p for Mobile Voice Access service

service cmm ??

incoming called-number 4143

no digit-strip

So I changed it to

dial-peer voice 4143 pots

description incoming d-p for Mobile Voice Access service

service ccm **

incoming called-number 4143

no digit-strip

That did it... Thanks..

542
Views
0
Helpful
2
Replies
CreatePlease to create content