Moving Secondary Failover server to another location

[dtran]

I have two Unity servers configured for failover, primary and secondary. Currently both are located at the same loacation on the same network, I will be moving the secondary server to our DR location in Tx and the IP address on this server will be changed.

Is there anything that I need to watch for when changing the IP address for failover to work properly ?

has anybody done this before ?

the two servers will be connecting over a 10M wan link. Thanks in advance !!!

Danny

[jbarcena]

This should help:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a82.html

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_upgrade_guides_chapter09186a0080623595.html

[j.house]

Have you had any progress with your failover server move?

Thanks in advance.

[dtran]

no, I currently have a single server running Unity 4.0.3 with Exchange on box and in the process of separating Unity from Exchange and reinstall it onto a separate server and at the same time adding a failover server. Once I get my new Unity environment with failover up running and tested then I will move the failover server to our DR location in Tx. I won't be moving the failover server until next month sometime.

Danny

[j.house]

Keep us updated on your progress.