Can I use MPE to send my video out using CUVTA to all of the web participants? The other participants will not send any video but they can have CUVTA installed if needed. I only want to send video from one person but I want the other participants to see that video. Thanks.
Do they just need CUVA installed without a camera or do they need to have thier own camera? I can install it no problem but making sure they are connected to a camera and also an IP phone that is video enabled is not something I want to take a chance on. If they just need the software installed that is fine.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...