Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multicast Meet-Me Conferencing on a Cisco 3825 Router

In order to configure a multicast meet-me conferencing resource on a Cisco 3825 router, is any additional hardware required? (Cisco CallManager Express Meet-Me Conferencing documentation suggests at least two PVDM2-64 DSP's and one VWIC-2MFT-T card needs to be installed).

I cannot find any documentation on how to

configure this feature. Any help would be much appreciated.

1 REPLY
Blue

Re: Multicast Meet-Me Conferencing on a Cisco 3825 Router

i think they recommend this, one for 64 DSPs for conferencing and 64 DSPs for the T1 channels. (you could use all 128 DSPs for conferencing & transcoding if required and may not necessarily need the 2MFT. you will need the NM-HDV to install the DSPs. (if you don't already have one or more with available DSP slots)

upto 15 sixteen participant conferences can be supported on a single NM-HDV.

see this link for more info:

http://www.cisco.com/en/US/products/ps6441/products_configuration_guide_chapter09186a0080541bf3.html

140
Views
0
Helpful
1
Replies
CreatePlease to create content