11-16-2009 09:23 AM - edited 03-19-2019 12:00 AM
Callmanger 6.1.3190.
I have a scenario where a user wants to be able to log in/out of two different Hunt Groups.
I have tried a test setup with a number making it a member of 2 Hunt Groups and assigning the Hlog softkey.
However when you log in /out it is both Hunt groups.
Is there any way of specifying which Hunt group you want to log in /out of ?
Thanks
Steve
11-16-2009 12:14 PM
Not in UCM. I believe you can pull it off with CME. Please specify which product and version you're using when posting.
11-20-2009 04:51 AM
One very clunky solution would be to use a phone with multiple lines - 796x - and create multiple extension mobility profiles for each user.
If, for example the user was a member of two hunt groups the user would have three directory numbers:
Main DN
Hunt Group 1 DN
Hunt Group 2 DN
He would then have three EM profiles as shown below:
Profile 1
Line 1 Main DN
Line 2 Hunt Group 1
Line 3 Hunt Group 2
Profile 2
Line 1 Main DN
Line 2 Hunt Group 1
Line 3 Unassigned
Profile 3
Line 1 Main DN
Line 2 Unassigned
Line 3 Hunt Group 2
The user would then have to logout and then login to the appropriate profile as required to join/leave hunt groups. All profiles would still have the HLog key to allow him to log out of hunt groups and just accept calls to his personal extension.
As I said at the start it is clunky but may be ok if it is only an occasional requirement.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: