If you'd like, you can define two different phone MACs to have the same shared phone extension. Give each phone the same extension and make sure each directory number is in the same CCM partition. When you call that number, both phones will ring. Note - unless you configure each phone to use the same ringer style, each will use its own ringer. For these instances, you can use the same ring pattern, by going into Settings, select Ring Type, and go from there.
You need to create a hunt group in call manager. First goto Call Routing -> Route/Hunt -> Hunt Pilot to create your hunt group pilot number. Then create your hunt list to determine which extensions will be dialed from the pilot ext and how they will be dialed, whether at the same time or in a sequence.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...