Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multitenant Configuration

Does anyone have a document or link as to how I would go about configuring multitenant for a hosted solution in ccm 4 and 6?

Many thanks

3 REPLIES
Cisco Employee

Re: Multitenant Configuration

the basic is to make sure that all the partitions and calling search spaces are designed properly so that there is no possibility of calling between companies.

make sure the GWs are assigned to each company and that you understand the way they want to dial internally and to the PSTN.

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Multitenant Configuration

Many thanks for the quick response. Is there any kind of document available that would show a demonstartion of how to carry this out?

Cisco Employee

Re: Multitenant Configuration

we have none docs on how to configure multitenant on the server (as its more related to just a dial plan design), you can refer to the dial plan under the SRND

Dial Plan 4.X

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/srnd/4x/42dialpl.html

Dial Plan 6.X

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/srnd/6x/dialplan.html

in the end it's just as simple as making sure that phones from companyA cannot call phones from CompanyB by not adding the partition in the CSS

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
128
Views
0
Helpful
3
Replies
CreatePlease to create content