Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need Help - cucm 6.0.1.2000-3 version - License PAK

Dear All;

How i can extract license PAK file from cucm 6.0.1.2000-3 version ?

Please assist me in this regard.

  • Unified Communications Applications
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Need Help - cucm 6.0.1.2000-3 version - License PAK

Hi Manish,

I don't believe this command was added until CUCM 7.1 or maybe

the latter 6.1 versions

file get

This command sends the file to another system through SFTP.

Command syntax

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

license filename [reltime] [abstime] [match] [recurs] [compress]

partBsalog directory/filename [reltime] [abstime] [match] [recurs]

salog directory/filename [reltime] [abstime] [match] [recurs]

tftp directory/filename [reltime] [abstime] [match] [recurs]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

license specifies license file.

partBsalog specifies the partBsalog log directory.

salog specifies the salog log directory.

tftp specifies a TFTP file.

directory/filename specifies the path to the file or files to delete. You can use the wildcard character, *, for  filename as long as it resolves to one file.

Options

abstime—Absolute time period, specified as hh:mm:MM/DD/YY hh:mm:MM/DD/YY

reltime—Relative time period, specified as minutes | hours | days | weeks | months value

match—Match a particular string in the filename, specified as string value

recurs—Get all files, including subdirectories

compress—Transfer files as compressed file

Usage Guidelines

After the command identifies the specified files, you get prompted to enter an SFTP host, username, and password.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This command gets all files in the activelog operating system directory that match the string "plat."

admin: file get activelog platform match plat

This command gets all operating system log files for a particular time period.

admin: file get activelog platform/log abstime 18:00:10/20/13 18:00:10/21/13

Need 'file list license' and 'file get license' commands

CSCsw17906

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
8 REPLIES
Cisco Employee

Need Help - cucm 6.0.1.2000-3 version - License PAK

You can't CUCM knows nothing about PAKs or any kind of ordering numbers, all CUCM knows is about the License files you install on it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Need Help - cucm 6.0.1.2000-3 version - License PAK

Hi;

I am going to reinstall cucm on same hardware but i dont have the licence so how i can extract the file file from existing cucm and can reuse it for fresh installation thats what i meant.

Cisco Employee

Need Help - cucm 6.0.1.2000-3 version - License PAK

Hi Muhammad,

If you don't have the original license files saved somewhere then you need to contact licensing team of Cisco TAC to get the license files based on the mac address of the Publisher.

HTH

Manish

New Member

Need Help - cucm 6.0.1.2000-3 version - License PAK

HI MANISH;

THERE IS A WAY TO EXTRACT LICENSE FILE VIA CLI COMMAND. THE SAME THING DID BY MY FRIEND THEREFORE I ASKED...

Cisco Employee

Need Help - cucm 6.0.1.2000-3 version - License PAK

I'll be glad if someone on the forum can enlighten me about the same.

Manish

Hall of Fame Super Red

Need Help - cucm 6.0.1.2000-3 version - License PAK

Hi Manish,

I don't believe this command was added until CUCM 7.1 or maybe

the latter 6.1 versions

file get

This command sends the file to another system through SFTP.

Command syntax

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

license filename [reltime] [abstime] [match] [recurs] [compress]

partBsalog directory/filename [reltime] [abstime] [match] [recurs]

salog directory/filename [reltime] [abstime] [match] [recurs]

tftp directory/filename [reltime] [abstime] [match] [recurs]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

license specifies license file.

partBsalog specifies the partBsalog log directory.

salog specifies the salog log directory.

tftp specifies a TFTP file.

directory/filename specifies the path to the file or files to delete. You can use the wildcard character, *, for  filename as long as it resolves to one file.

Options

abstime—Absolute time period, specified as hh:mm:MM/DD/YY hh:mm:MM/DD/YY

reltime—Relative time period, specified as minutes | hours | days | weeks | months value

match—Match a particular string in the filename, specified as string value

recurs—Get all files, including subdirectories

compress—Transfer files as compressed file

Usage Guidelines

After the command identifies the specified files, you get prompted to enter an SFTP host, username, and password.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This command gets all files in the activelog operating system directory that match the string "plat."

admin: file get activelog platform match plat

This command gets all operating system log files for a particular time period.

admin: file get activelog platform/log abstime 18:00:10/20/13 18:00:10/21/13

Need 'file list license' and 'file get license' commands

CSCsw17906

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
Cisco Employee

Need Help - cucm 6.0.1.2000-3 version - License PAK

Nice info Rob [+5] . So, on the 6.0.X version this option to download license files from CLI is not available.

Manish

Hall of Fame Super Red

Re: Need Help - cucm 6.0.1.2000-3 version - License PAK

Hi Manish,

Sorry forgot to give you +5 for your correct info . This command was not

available in CUCM 6.0. As you can see here it wasn't in 7.0 either;

file get

This command sends the file to another system by using SFTP.

Command Syntax

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

partBsalog directory/filename [reltime] [abstime] [match] [recurs]

salog directory/filename [reltime] [abstime] [match] [recurs]

tftp directory/filename [reltime] [abstime] [match] [recurs]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp39648

Cheers!

Rob

"When it comes to luck you make your own  " 

- Springsteen

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
240
Views
10
Helpful
8
Replies