When you purchase a CME feature License (to implement CME) it is based on the number of users and includes the appropriate user Licenses.For example, if you were setting up an office with 40 users you might order;
Which would leave you room to expand by 8 new people somewhere down the road.
The 500 series of phones are NOT supported on CME, so the next well-priced model suggestion
That depends on licensing. The phone models are identical. The -CCME version has a licensing component. If you already have licenses you should be good to go. If you have licenses from a CUCM install, you may still be good to go but would have to dance with your Cisco AM to get it worked out.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...