cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
449
Views
4
Helpful
8
Replies

no access by GUI CME 4.0 ?????

I set the access by GUI option, I load the files in the flash and also I set the commands required to have access. When I tried to access by http://10.10.10.1/ccme.html the main page is displayed buy I have no access to the options, If I access by http://10.10.10.2/WEB (unity access) I have complety access to the options.

In other equipments where there is no unity installed if a access by http://10.10.10.1/ccme.html the main page is displayed buy I have no access to the options so I can not make any changes by the GUI

I have checked if all the files required are in the flash and they are.

any reason o somethingis left???

1 Accepted Solution

Accepted Solutions

If you copied the files to the flash using a SANDISK reader plugged into your laptop, make sure that the files that are used for displaying the page are lowercase. There is a bug in microsoft that causes some of the files to be changed from lowercase to upper case when you do a copy and paste. Here are a few files in particular that are affected by it:

sxiconad.gif

uparrow.gif

logohome.gif

dom.js

Make sure these files are lower case. You can change them through the command line by doing a "rename flash:oldfilename newfilename"

See if this is the root of your problems

View solution in original post

8 Replies 8

paolo bevilacqua
Hall of Fame
Hall of Fame

Are you using the mandatory IE6? Have you enabled javascript ?

If you have coped the files in a directory, include that in "ip http path ...".

Hi

I have already set

ip http server

no ip http secure-server

ip http path flash:

telephony-service

web admin system name cisco password cisco

dn-webedit

time-webedit

what I don't understand is why I have complete access using the path for unity express http://10.10.10.2/WEB but I have no access if I try http://10.10.10.1/ccme.html

(the main page is display with the options but I have no access).

i'd suggest to double check the config just to make sure you already have it all in there

Enabling the GUI

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html

javalenc

HTH

java

if this helps, please rate

Hi,

I am having same kind of problem but with Cisco Unity Express GUI is not working for me, CME GUI is working fine.

Thanks in advance for any helpfull idea!

Hi,

I have already anabled javascript but the result is the same. Which other options should I check in the browser? If thw browser is the problem why I can access all the options with the Unity express's GUI?????

If you copied the files to the flash using a SANDISK reader plugged into your laptop, make sure that the files that are used for displaying the page are lowercase. There is a bug in microsoft that causes some of the files to be changed from lowercase to upper case when you do a copy and paste. Here are a few files in particular that are affected by it:

sxiconad.gif

uparrow.gif

logohome.gif

dom.js

Make sure these files are lower case. You can change them through the command line by doing a "rename flash:oldfilename newfilename"

See if this is the root of your problems

Hi dboutieller,

I haven't realized of that difference, I have just checked those files and you are right!!!

I'm going to make those changes you recomend.

I really appreciate your time for answering .

Regards,

Hi dboutieller

I have just made the changes, now I CAN ACCESSS via gui to all option !!!!

A lot of thanks !!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: