07-16-2008 03:04 AM - edited 03-18-2019 09:18 PM
Hi Team,
There is two part.no in GPL
NOK-SCCP-CCM-01=
and
SW-CCM-UL-NOK=
What the difference?
Ok if i install Intellisync CallConect to the phone and buy NRB0050000 (Nokia part.no). What additional things i must buy to use Nokia Phone with CME?
Thank you!
07-16-2008 04:36 AM
Hi,
NOK-SCCP-CCM-01= is Cisco product code for Nokia ICC for Cisco client licence.
Not sure what SW-CCM-UL-NOK= is.
You can first try the client for free (60 days) before purchasing the licence.
No additional things needed to use Nokia phone with CME.
Latest client is here:
http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php
11-02-2008 03:05 AM
Sorry,
i have purchased a NOK-SCCP-CCM-10 license.
My question is if i have to put the same code of twelve digit in every of ten Nokia Phone, or i have to insert it in some portal, to obtain ten different codes?
Thanks a lot.
11-02-2008 10:33 PM
Hi,
You have to use the same license code for every phone.
Br,
-Pasi-
11-03-2008 12:06 AM
Hi Alexandr,
NOK-SCCP-CCM-01= is Cisco's part number which gives you Nokia Intellisync Call Connect 1.1 client software.
Along with this what you need is Cisco Communications Manager Licensing for it to
be used with Cisco Unified Communications Manager.
For use with Communications Manager
Release 5.x and higher, six DLU (Device License Units) are required for each Nokia Client.
LIC-CM-DL-10=
For use with Cisco Unified Communications Manager Release 4.x you need
SW-CCM-UL-NOK=
Single Cisco Unified Communications Manager
License for Nokia Eseries Dual Mode Phone
HTH
-> Sushil
04-11-2009 02:06 AM
Hi,
Running UCM 6.1.2.
My Question is if i want to use the Nokia Intellisync Call Connect client with the CallManager, do i require license file from Cisco to integrate the Nokia Phone with UCM ?
Regards,
04-11-2009 02:41 AM
Hi,
if i have understand the question, you have to download from the same place wher you download yuor ICC client, the device package file for install it on CUCM 6.
In this way, when you will insert a new device, you will find in the list the device S60, that represent the NOKIA.
The only license you have to purchase is the NOKIA license that you insert on ICC.
When you define it in Call Manager, it takes six units.
Bye
04-11-2009 06:01 AM
Hi Costantino,
Thanks for you reply.
We are running UCM 6.1.2.
I need one more clarification, if i download the file from Nokia "cmterm-nokia_s60_2.0-sccp.cop.sgn" and in OS administration,the file will be installed through, Upgrade>install Upgrade and after installing do we need to restart the UCM OR any other necessary prerequesite for this installation. Because UCM is in production.
Let me any other procedure to install the file on UCM.
Regards,
04-11-2009 11:01 AM
Hi,
you have only to install succesfully the package from the Upgrade section of CUCM.
When it finished, you should try to create a new device and in the list there will be the "S60" device.
Bye.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide