I'm currently running a CCM 4.1.3 cluster and one Unity box 4.0.3.
And we are going to implement another CCM cluster for one our subsidary but there is only a need for 10 additional voicemail. Is it possible to connect the 2 different CCM cluster on only one Unity Box?
Another way to do this is to create an ICT between two clusters and send voicemail calls into Unity from one callmanager (cluster b) to the other (cluster a). Only cluster a will have an integration with Unity. WIth this setup, MWI wont work. So what you can do is setup two or four ports from Unity to register with cluster b and use that just for turning MWI on/off. This way, cluster a and b share the same set of ports in Unity, except for MWI.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4