Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Operator calls Transfer return back to him

Hi all

I have CUCM 7 and when external incoming calls to operator and he transfer the calls to part C the call will keep ring Phone C then return back to operator.

The operator use Tansfer SoftKey dial Phone C then Transfer again.

I tried a parameter Onhook Call Transfer to True so Operator can Transfer softkey and hang on but still call retuen to him.

I did my search and found that this feature is only in CME (Call-Transfer Recall) and not in CUCM.

Only incoming PSTN calls return back to Operator but Incoming Mobile calls never return to operator as after ringing for a while the call is disconnected. 

Did anyone face this problem before, i am trying to stop calls not to return back to operator phone after he transfer it.

10 REPLIES

Re: Operator calls Transfer return back to him

Are you using Attendant Console for the Operator?

Hailey

Please rate helpful posts!

New Member

Re: Operator calls Transfer return back to him

Not using attendant console.All calls are through IP Phones

Hall of Fame Super Red

Re: Operator calls Transfer return back to him

Hi Ayman,

It sounds like the Forward No Answer for the the user "C" may be set to

go back to the Operator. Can you check this out

Cheers!

Rob

New Member

Re: Operator calls Transfer return back to him

No there is no FNA configured on Phone C not that easy

Hall of Fame Super Red

Re: Operator calls Transfer return back to him

Hi Ayman,

I'm not sure why you would rate Hailey and I with "1" point

ratings for simply asking a question to try and help solve

your issue You won't get much help around here with

that attitude!

Good Luck!

Rob

New Member

Re: Operator calls Transfer return back to him

Sorry for that but i am new in this voting things and i did that as the answer was not what i need for i vote not helpful

Cisco Employee

Re: Operator calls Transfer return back to him

That's something the old rating system did explained, if someone asks you for information you DO NOT rate that.

No one here is a psychic so if you do not provide enough information they'll ask in their attempt to help.

I would have asked the same thing, as CUxAC provides the transfer reversion feature.

Same for Rob's suggestion, (unless Rob has recently bought a crystal ball =) ) what he mentioned could cause that call flow you mention.

Friendly advice:

Bear in mind this a FREE forum and people are trying to help YOU with the problems you might have, giving away 1s all over the place won't get you far here.

+5 to you guys that take the time from your busy schedule to try to help

java

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Hall of Fame Super Red

Re: Operator calls Transfer return back to him

Hi Ayman,

OK

If you don't find the answer helpful just don't rate/vote anything. I never rate anything less than a "5"

or not at all.

So....back to your dilemma. What is the call flow here? Does this problem

only happen for User/Phone "C"? If so, can you send a some screen shots

for user "C's" Directory Number config page.

Cheers!

Rob

New Member

Re: Operator calls Transfer return back to him

No it happened for all users, user C is only for explain

Hall of Fame Super Red

Re: Operator calls Transfer return back to him

Hi Ayman,

Just for troubleshooting purposes can you please attach the requested

screen shots for user C

Cheers!

Rob

477
Views
22
Helpful
10
Replies
CreatePlease to create content