Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Outgoing caller ID on FXO ports

Is there a way to specify caller ID outgoing on FXO ports in CME or is that just controlled by the phone company? I have someone that wants people they call to see their main number whichever FXO port they call from instead of the number for each of the individual analog lines.

3 REPLIES
Hall of Fame Super Red

Re: Outgoing caller ID on FXO ports

Hi Brian,

Yes, this is something that is set by the Telco Provider.

Hope this helps!

Rob

New Member

Re: Outgoing caller ID on FXO ports

You may also be able to add the following command to your outbound dial peer(s)-

clid network-number xxxxxxxxxx (your main number)

In some cases the Telco may not accept it, but if they do it works fine.

Mike

Hall of Fame Super Gold

Re: Outgoing caller ID on FXO ports

But this doesn't work for FXO (analog) lines.

Just like you will never be able to change the caller-id to show when you call from home.

387
Views
0
Helpful
3
Replies