my question refers specifically to the use of the tool, public distribution list creator - can that be used to add or create pdl's where the members are not on the local server but distributed amongst digitally networked servers? The help file states that members can only be added from the local server - is there any enhancements to this tool that will make it available for use across digitally networked servers?
I'm assuming you mean the public distribution list builder for Unity and not for Connection?
Currently you have to run it against the local installs on each server - the public DLs are replicated so this can be done. The stored procs for adding users to the dl, at least the last time I checked, didn't allow for passing in the objectID of a user not in the local suscribers table - I can look at a 7.0 system real quick to see if it's still the case or not but at the time there wasn't an easy work around for this. AD manages the DLs, not Unity, so you have to play by their rules when editing them and pushing the changes via the SQLSyncSvr as PDLBuilder does.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...