Personal Communicator 8.0 and Outlook 2007 Call and IM features
we have just installed CUPC8.0 and the users have Outlook 2007. we would like to ne able to use the IM and call features within Outlook 2007. but from several hours of testing it looks like the users login name for the phone has to be the same as the users email addrerss for the Presence to be displayed and the Call and IM features to work. This is fine but with users logging in and out of the phones on a daily basis it will take a considerable amount of time to log into the phone using thier first name and last name. is there a way round this ? our system is not intergrated with AD via LDAP. would this resolve the issue ? as both systems seem a bit disjointed.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...