Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Phone Status in CUPS 7.0(2)

Hi,

We are using CUCM 6.1(2) wirh CUPS 7.0(2) without LDAP integration. We don't use CUPC, we have do integrate Sametime-Connect client 8.0.

Our Problems:

First we see no Line association on CUPS Presence Viewer, but have done alls integration-steps (Owner, Device-Association, Line-Config..)

Second our Sametime-Connect-Client has login sucessfully on CUPS but have troubles with sip-registration on tcp 5060.

13 REPLIES
Red

Re: Phone Status in CUPS 7.0(2)

The best practice for Sametime/CUPS integration is to use CUPC as a test tool.

The Cisco plugin in Sametime-connect-client is like a "mini-CUPC". But the troubleshooting info and logs are as detailed as CUPC.

If you can get CUPC worked, troubleshooting Sametime plugin would be much easier.

To answser you questions:

1) "Line Assoication" was configured at CUCM Admin > Device > Phone > Directory Number > (bottom of the page) Associate to End User.

2) To fix "SIP registration" issue, try to go to CUPS Admin > System > Security > Incoming ACL. Add an ACL with address pattern "all" (without quotations).

For more tech tips, see http://htluo.blogspot.com

Thanks!

Michael

New Member

Re: Phone Status in CUPS 7.0(2)

Hi, First: Thanx for your help!

About your questions: all Configurations are done!

I've installed CUPC without configuring the Phone on CUCM.

CTI works fine and I'm able to make calls.

Presence-Infos are still missing!

Red

Re: Phone Status in CUPS 7.0(2)

If I understood it right, you were NOT able to see phone presence on CUPC. Is that correct?

If yes, you need to troubleshoot phone presence on CUPC first.

There are many stuff to check on this:

1) SIP trunk between CUPS and CUCM

2) Line appearance association

3) CUP licensing

4) CUPC reachability status

It's very difficult to troubleshoot phone presence issue from CUPC log. Because CUPC passively receive the phone presence info. It won't complain if it didn't receive phone presence (ie. no error messages in CUPC logs).

I'd recommend you open a TAC case or take a look at http://www.lulu.com/content/5552336.

Thanks!

Michael

New Member

Re: Phone Status in CUPS 7.0(2)

Hi,

Yes, you unterstood it right!!

Your book is already ordered!

At monday we'll do a new server installation for CUPS. For CUCM we'll delete all configurations.

Do you have a giudeline for the installation we need? CUPS 7.0(2) and CUCM 6.1(2) without LDAP.

Thanx for your help so far! Nice weekend!

New Member

Re: Phone Status in CUPS 7.0(2)

Hi!

Now we got the book "Deploying Cisco Unified Presence" but we've still problems.

First: Our "Client status" didn't work properly. In step 2 we have to create a Proxy Profile and assign users to it. Sorry but in CUPC7.0 i cant's find that option??

New Member

Re: Phone Status in CUPS 7.0(2)

I've now found my BUG. It was a problem with auf FW-System. Can anyone tell me the TCP port range for "Livebus messaging port"? At doku cupsportusage.pdf only 50000 is in use, but we are using a range!

Red

Re: Phone Status in CUPS 7.0(2)

Red

Re: Phone Status in CUPS 7.0(2)

On CUPS 7, you don't have to create a proxy profile. All users will be put in a system default profile.

What problem you are having now?

Michael

New Member

Re: Phone Status in CUPS 7.0(2)

Now i see client status available and so on, but on "General" i won't see my own User (contact)! I think CUPC didn't receive "200" in SIP.

New Member

Re: Phone Status in CUPS 7.0(2)

Hi

Could you send me a screen capture of sametime client with phone status icon.  Does the phone appears by default after we install the plugin (but greyed out) or does it come on only after we integrate CUPS with sametime?  Does the new version of CUPS 7.0(2) look at other ldap field like description rather than the internet address?

Thanks

New Member

Re: Phone Status in CUPS 7.0(2)

Since my last update I did a

lot of things!

Now we use the last available Cisco Click-to-dial Plugin. We also use LDAP for user an user-authentication.

We use CUCM 6.1.4 and CUPS V7.

For LDAP we had to use a TLS connection, but the plugin doesn't support TLS.

With CUPC Presence works but for Sametime I can't see the icons for presence at the samtime frontend.

New Member

Re: Phone Status in CUPS 7.0(2)

HI Martin

I am facing the Same issue with Sametime Connect Plugin , I have 8.0.1 B with LN 8.0 and sametime connect 8.0 and 8.5.1 ( two pcs ) . CUCM version 7.1.5 . CUPS 7.0

The phone icon is not displayed beside the user reflect his presence information ( offhock , on hock...etc )

I have tried using CUPC as a test and it works fine without a problem .

Did you reach somthing in ur issue

thanks

New Member

Re: Phone Status in CUPS 7.0(2)

Hi,

we can solve our problems.

First using cupc 8

Sametime Connect client 8.5

cucm 7.1.5

we use softswitchden field in ldap.

http://www.lulu.com/content/5552336 this helps us

830
Views
10
Helpful
13
Replies
CreatePlease login to create content