Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIMG Avaya G3 Integration 4.0(3) Not Supported

Greetings,

Can anyone verify whether or not 4.0(3) will support PIMG integration for an Avaya G3?

Thanks,

CT

2 REPLIES
Cisco Employee

Re: PIMG Avaya G3 Integration 4.0(3) Not Supported

This doc Supported Circuit-Switched Phone System Integrations confirms that it is supported. I also found a bug that was fixed in 4.0(3) Sr1 for pimg so that implies that it is supported.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_system_requirements_hardware09186a0080531f2a.html#wp31803

However I could not find Circuit-Switched via Intel PIMG option as described in Creating a New Integration with the Avaya Definity G3 Phone System

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_configuration_guide09186a008037d0d6.html#wp1451267

I am currently installing sr1 on my lab server to see if the option appears.

Cisco Employee

Re: PIMG Avaya G3 Integration 4.0(3) Not Supported

From the utim help-file for Unity 4.0(3) UTIM

commserver/Utilities/Utim/help/utim.htm#_Toc37836313

UTIM lets you add a PIMG unit to an integration with a circuit-switched phone system that uses PBX IP Media Gateway (PIMG). Do the following procedure.

To Add a PIMG Unit

1. In the left pane of the UTIM window, click the circuit-switched phone system integration that you want to add a PIMG unit to.

2. On the PIMG menu, click Add. The new PIMG unit appears in the left pane, and the integration page for the unit appears in the right pane.

3. In the right pane, enter the unit settings for the integration page indicated in the applicable integration.

94
Views
0
Helpful
2
Replies