Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIMG issue for connecting CUC and Nortel PBX, need help

Hi

We use 8 ports UNITY-PIMG-DIG to connect a Nortel PBX and Cisco Unity connection. Once it works fine. Now we meet a problem. The first two ports of the PIMG can not pick up the call and transfer it to the Unity correctly. It makes Nortel PBX identify this as a failed call and transfer it to the Nortel attendant. I make a simple test, when I connected the line once was plug in the first two ports of PIMG to a standard Nortel phone, it rings correctly.

I traced both of the call, here is the log.

(1) When connect the line to PIMG

.trac 12 1 4 1

TN 012 1 04 01

KEY 0 SCR MARP ACTIVE TN 012 1 04 01 DIRECT MW_CALL

ORIG 012 1 04 01 0 SCR MARP 0 7569 2616

TERM 000 0 12 15 0 SCR MARP 0 6714 2616

DIAL DN NONE

MAIN_PM ESTD

TALKSLOT ORIG 94 TERM 30

QUEU NONE

CALL ID 0 6541

(2) When connect the line to a phone

.trac 12 1 4 1

TN 012 1 04 01

KEY 0 SCR MARP ACTIVE TN 012 1 04 01

ORIG 012 1 04 01 0 SCR MARP 0 7569 2616

TERM DN 6714

TDTN 16 SLOT 15 PTY SLOT 79

DIAL DN 6714

MAIN_PM RING AUX_PM

TALKSLOT ORIG 81 TERM 17 JUNCTOR ORIG0 TERM0

QUEU CAD

CALL ID 0 7125

166
Views
0
Helpful
0
Replies