Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ping response on CUCM 6 server

Hi guys ,i have a problem on my CUCM6 server where if you ping the server from anywhere on the network it replies to 5 pings and then drops 1 consistently. Although if i ping anything else on the same lan as the CUCM servers it is fine. This is happening with all 3 my CUCM6 servers ,any ideas what this could be ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Ping response on CUCM 6 server

Hi Rynard,

This is working as designed :)

ICMP rate limiting is used to prevent ICMP Echo Request Flood Denial of Service attacks like documented here;

Cisco Security Advisory: Multiple Cisco Unified CallManager and Presence Server Denial of Service Vulnerabilities

http://www.cisco.com/en/US/products/products_security_advisory09186a008080f17b.shtml#@ID

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Ping response on CUCM 6 server

Hi Rynard,

This is working as designed :)

ICMP rate limiting is used to prevent ICMP Echo Request Flood Denial of Service attacks like documented here;

Cisco Security Advisory: Multiple Cisco Unified CallManager and Presence Server Denial of Service Vulnerabilities

http://www.cisco.com/en/US/products/products_security_advisory09186a008080f17b.shtml#@ID

Hope this helps!

Rob

New Member

Re: Ping response on CUCM 6 server

Thanks Rob ,was getting a bit worried there.

Hall of Fame Super Red

Re: Ping response on CUCM 6 server

Hey Rynard,

You are most welcome. Always better "safe than sorry" my friend!

Cheers!

Rob

600
Views
0
Helpful
3
Replies
CreatePlease login to create content