06-24-2014 08:16 AM - edited 03-19-2019 08:19 AM
I have a customer asking if Polycom conference stations can register and work with CME 7.1. I am having trouble locating a known implementation or guidelines for it.
Anyone know if this works as simply as programming a Cisco 7937?
Thank you,
Jason
Solved! Go to Solution.
06-24-2014 08:49 AM
Assuming it's a soundstation, then your answer is yes.
This doc will walk you through:
http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/dg_soundstation_ip_conference_phones_with_cucm.pdf
06-24-2014 08:49 AM
Assuming it's a soundstation, then your answer is yes.
This doc will walk you through:
http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/dg_soundstation_ip_conference_phones_with_cucm.pdf
06-26-2014 01:24 PM
Thank you. I had found that, but wanted a second verification. I will give it a shot and let you know if I pull it off.
Regards,
Jason
06-27-2014 03:45 AM
Hi Jason,
At seeing the post it seems that, you have asked for CME not CUCM
Cisco 7937 works on SCCP but any third party phone works on SIP with CUCM/CME.
For CME you can visit below link..
http://www.learnios.com/viewtopic.php?f=4&t=29693
http://uc-b.blogspot.in/2011/07/cisco-cme-w-3rd-party-sip-phones.html
Suresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide