Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Polycom phones with CME 7.1

I have a customer asking if Polycom conference stations can register and work with CME 7.1.  I am having trouble locating a known implementation or guidelines for it.

Anyone know if this works as simply as programming a Cisco 7937?

 

Thank you,

Jason

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Assuming it's a soundstation,

Assuming it's a soundstation, then your answer is yes. 

This doc will walk you through:

http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/dg_soundstation_ip_conference_phones_with_cucm.pdf

 

3 REPLIES
New Member

Assuming it's a soundstation,

Assuming it's a soundstation, then your answer is yes. 

This doc will walk you through:

http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/dg_soundstation_ip_conference_phones_with_cucm.pdf

 

New Member

Thank you.  I had found that,

Thank you.  I had found that, but wanted a second verification.  I will give it a shot and let you know if I pull it off.

Regards,

Jason

VIP Gold

Hi Jason,At seeing the post

Hi Jason,

At seeing the post it seems that, you have asked for CME not CUCM smiley

Cisco 7937 works on SCCP but any third party phone works on SIP with CUCM/CME.

For CME you can visit below link..

http://www.learnios.com/viewtopic.php?f=4&t=29693

http://uc-b.blogspot.in/2011/07/cisco-cme-w-3rd-party-sip-phones.html

 

Suresh

55
Views
0
Helpful
3
Replies