Does anyone know of any potential issues with loading up say 100 Unassigned DN's in UCM (8.6) with all the Directory Number Settings but not assigned to a device??
The end game here is we have a few 100 DIDs that are reserved for different reasons (diff caller ID or for a customer) that we want loaded in the system so they are reserved and no one will try and use them (the idea being someone will add a DID from this and the description will populate and they will know they need to grab a different DID).
I can even forward to Unity but dont think it matters as these are all NEW DIDs that have never been assigned nor advertised.
Our engineering team seems to think this will cause an issue as call manager will be under a heavy load constantly trying to figure out what devices these unassigned DNs are attached to. I say no because they have never been assigned to a device are are essentially a place holder.
Would this cause an issue?
If so - how do you guys manage your un-used DIDs in call manager - it seems awfully archaic to manage a spreadsheet with unused DID's that we have to rely on the entire team across the world to update when they make changes when we basically have a database (Call manager) here to do that for us!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...