Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Presence 7 failover

Howdy,

I have two presence server 7.0(3) setup in high availability mode.

When i drop the primary server presence stops working. When i login again it connects to the backup ok but presence fails.

Cupc problem report shows this:

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - CUPC_PRESENCE reportResult(DISCONNECTED): reason=DISCONNECTED, functionality=NONE

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - $$$***** CUPC_PRESENCE Server 10.200.10.51, State was CONNECTING_BACKUP, ServerAdapter 0xffffffff

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCPersonManager - PMWabiAccountManager::readyToFailover()

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - CUPC_PRESENCE tryNextServer(), trying server[0]: 10.200.10.52:5060(TCP)

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - CUPC_PRESENCE tryNextServer() - next server is primary, we'll wait to retry

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - CUPC_PRESENCE setState(): [CONNECTING_BACKUP] --> [DISCONNECTED_WAITING_TO_RETRY]

2009-05-06 11:54:49,765 [0x00000e20] DEBUG LCWIN32UI - Connection Transition(Hub): lHint = 2107, type=5, state=7

2009-05-06 11:54:49,765 [0x00000e20] DEBUG LCWIN32UI - Presence Interface not available. The presence interface is not connected

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - RetryTimer::calculateNextInterval() = 5000 ms

2009-05-06 11:54:49,765 [0x00001c74] DEBUG LCConnection - CUPC_PRESENCE waitingToRetry(5000 ms): not implemented

2009-05-06 11:54:49,765 [0x00000e20] DEBUG LCWIN32UI - Presence Interface not available. The presence interface is not connected

Any ideas what to look for?

1 REPLY
Red

Re: Presence 7 failover

CUPC log won't tell you too much on this issue. To troubleshoot SIP/presence issue, you'd better do a sniffer capture on the CUPC computer.

On the server side, SIP Proxy and Presence Engine logs would help. Set the trace level to debug.

Michael

http://htluo.blogspot.com

328
Views
0
Helpful
1
Replies
CreatePlease to create content