Hi All,
I have a CUPS running code 80.2.
When I run show hardware, it show that I have a 7825I4.
The closest thing I can find in the hardware compatibility list is the 7825-I4-IPC1 which would require a "bridged upgrade"
I then looked up 'bridged upgrade'
From the way I understand it, I need to purchase new hardware in order to run version 8.6 in my environment.
The bridged upgrade allows me to use a DRS backup to restore the old config somehow????
Is this correct please?
Thank you very much for any help.
Regards,
Amanda Lalli-Cafini
MCS-7825-I4-IPC1 | X | X | X, B1 |
Note 
For Release 8.0(1), Cisco Unified Presence does not support MCS-xxxx-I1-IPC1 or MCS-xxxx-H1-IPC1servers. However, a bridged upgrade is available to customers who need to migrate from any of the discontinued hardware to supported hardware.
Legend for Table 1:
•Blank cell—server is not supported
•X—server is supported for production use
•B—server is only supported for a bridged upgrade
Active Version | 8.0.2.10000-30 |
The outpug of the show hardware is
admin:show hardware
HW Platform : 7825I4
Processors : 1
Type : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
CPU Speed : 3000
Memory : 2048 MBytes
Object ID : 1.3.6.1.4.1.9.1.746
OS Version : UCOS 4.0.0.0-36
Serial Number : KQZLVWT
RAID Version :
Raid firmware version: 1.26.81.00
Raid Bios version: 6.16.00.00
BIOS Information :
IBM IBMBIOSVersion1.44-[M9E144AUS-1.44]- 06/11/2009
RAID Details :
LSI Logic IR Configuration Utility 2.00.15
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS1064E
BIOS version : 6.16.00.00
Firmware version : 1.26.81.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 112
Maximum physical devices : 62
Concurrent commands supported : 266
Slot : 0
Bus : 1
Device : 0
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1
Volume ID : 1
Status of volume : Okay (OKY)
RAID level : 1
Size (in MB) : 237464
Physical hard disks (Target ID) : 3 2
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #112
Target on ID #2
Device is a Hard disk
Enclosure # : 1
Slot # : 1
Target ID : 2
State : Online (ONL)
Size (in MB)/(in sectors) : 238475/488397168
Manufacturer : ATA
Model Number : WD2502ABYS-23B7A
Firmware Revision : 3B04
Serial No : WD-WCAT1F436082
Drive Type : SATA
Target on ID #3
Device is a Hard disk
Enclosure # : 1
Slot # : 0
Target ID : 3
State : Online (ONL)
Size (in MB)/(in sectors) : 238475/488397168
Manufacturer : ATA
Model Number : WD2502ABYS-23B7A
Firmware Revision : 3B04
Serial No : WD-WCAT1F407772
Drive Type : SATA
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 5005076b:064c8ad0
Numslots : 4
StartSlot : 0
Start TargetID : 0
Start Bus : 0
------------------------------------------------------------------------
admin:
admin:
admin:
admin:
admin:
admin:
