Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem in Cisco Unified IP Phone 8961: How to register in Cisco Unified Communications Manager 7.1.(3)

Hi,

I am trying to register our 8961 Cisco IP Phone to register to the CUCM 7.1.3 but it doesn't seem to appear in the list of the phones supported. Upon further research, we found out that it is actually a SIP Phone. We tried registering it as a SIP Phone, however we cannot find any user/password field in the phone itself.

I hope anyone can help out.

5 REPLIES
Hall of Fame Super Silver

Problem in Cisco Unified IP Phone 8961: How to register in Cisco

Which exact version of CUCM are you running as this phone is supported on 7.1(3a)SU1 =7.1.3.21900-4 and newer:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10451/ps10511/data_sheet_c78-565397.html

HTH,

Chris

New Member

Problem in Cisco Unified IP Phone 8961: How to register in Cisco

CUCM 7.1.3.30000-1

Regards,

Roi

Hall of Fame Super Silver

Problem in Cisco Unified IP Phone 8961: How to register in Cisco

You may need to download latest device pack for version 7.1.3:

cmterm-devicepack7.1.3.33031-1.cop.sgn

http://software.cisco.com/download/release.html?mdfid=282421166&flowid=5328&softwareid=282074299&release=7.1(5.36121)&relind=AVAILABLE&rellifecycle=&reltype=latest

HTH, please rate all useful posts!

Chris

New Member

Problem in Cisco Unified IP Phone 8961: How to register in Cisco

Will this update affect existing ATA 186 in our network?

Thanks Sir!

Roi

Hall of Fame Super Silver

Problem in Cisco Unified IP Phone 8961: How to register in Cisco

It may change the firmware version, if you do not want to update any firmware versions you will need to take a note of your current firmware versions under device defaults and then change it back after installing the device pack.

HTH,

Chris

306
Views
4
Helpful
5
Replies