I have a problem when calling to voicemail number from external.
1. When I call the voicemail DDI number, I am hearing ringback tone, instead of the voicemail greeting. If I call internally, it will work well, but not externally. I have did a debug and saw that the call did route into the CME correctly.
2. When I activate call forward all on one DN to voicemail and tried calling in from external, I am also hearing ringback tone (ringing w/o triggering to voicemail). However my call is actually recorded in voicemail.
However, if the call is overflow to voicemail when CFNA, it will work fine.
I am running CME 4.3 (IOS 12.4(15)XZ) with CUE 3.1.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...