The voice gateway is H323 gateway.A PSTN user dial into voice mail pilot through H323 gateway from outside. Unity System prompt user to input user id.After user input user id, system prompt that it doesn't hear user's input and ask user to input again.Unity system cannot get what user input when user dial from outside.It's fine when user dial from inside.So what should I do?
Sounds like the DTMF is not getting from your gateway to Unity. Make sure dtmf-relay is set on the dialpeer used by this call. Assuming Unity is configured with SCCP ports connected to CCM or CME, then using h245-alphanumeric on the gateway is probably your best bet.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4