Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Public Distribution Lists Unity 7.0

We have a need to send a broadcast voice message to a DL for only a handfull of users. I looked into broadcast messaging but you can not edit users as far as I can tell. I set up a test Public DL and added a few users into it but I seem to be missing a step or I am not really sure how it is supposed to work. I checked for documentation and find it on how to set up the DL but not much else.

Any help would be great!

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Public Distribution Lists Unity 7.0

HIWilliam,

DOH!! It would help if I could read

Try it first with you as the Owner;

System Administration Guide for Cisco Unity Release 5.x (With Microsoft Exchange)
Managing Distribution Lists

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag240e.html#wp1047746


https://supportforums.cisco.com/docs/DOC-3310


Cheers!
Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

4 REPLIES
Hall of Fame Super Red

Re: Public Distribution Lists Unity 7.0

Hi William,

No worries, the first couple I've set up on Unity Connection lost me

as well

One thing we have done is to assign a "phantom" DN to System DL's

to make it easier to send to them. Sending by name is a tad tedious

to say the least. Use any unused number for this. here is an example;

So you have a new test_dl

assign 1333 for extension on Edit Distribution ListPage

set up/assign members

exit

Access your mailbox

enter PIN

Press x to send (depends on conversation you are using)

record new "Broadcast" message

press#

send to 1333 press# to send

MWI lamps will light on test_dl member phones

and new "Broadcast" message will be received.

Cheers!

Rob

Community Member

Re: Public Distribution Lists Unity 7.0

This is standard unity not unity connection..does this make a difference?

Do I set the owner as myself to test?

Hall of Fame Super Red

Re: Public Distribution Lists Unity 7.0

HIWilliam,

DOH!! It would help if I could read

Try it first with you as the Owner;

System Administration Guide for Cisco Unity Release 5.x (With Microsoft Exchange)
Managing Distribution Lists

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag240e.html#wp1047746


https://supportforums.cisco.com/docs/DOC-3310


Cheers!
Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

Community Member

Re: Public Distribution Lists Unity 7.0

just what I was looking for !

thanks!

426
Views
0
Helpful
4
Replies
CreatePlease to create content