I recently created two public distribution lists and checked "Show distribution list in e-mail server address book" option, In AD there are two distrbution lists by the same name (these were created in AD not Unity).
Therfore now there are now two distribution lists in AD by the same name,
While creating these distribution lists in Unity a user was sepecified as the owner, but when i see this distribution list in AD there is no owner of these distribution lists (Is this attribute not propogated to AD),
Since the user can see two distribution lists by same name in outlook address book, he wants one of them to be removed
Can the user modify the membership of public distribution lists created in Unity ??
Public DLs created in AD and created in Unity are not different - both can be seen and modified within ADUC no problem - there's nothing special about the Unity created DLs other than a few extra properties we populate for voice addressing purposes (i.e. we can add an extension and owner properties).
The extensions in Unity are stored on property extensions - there are up to 10 of them for Unity remember. Also, the Extensions must be unique across the dialing domain in Unity so we have to restrict changing them/adding them such that they remain unique - if we used the extension fields in AD we would not have that control.
When importing users from AD into Unity you can copy the busines phone field into Unity's primary extension field but after that the fields are no longer connected.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...