I am using QM with CUCM 7.1 & UCCX 7.0 - I believe my configuration is fine and am trying to accomplish recoding for IPPA (IP Phone Agent with 7942). I have configured SPAN on my 3560 switch (both server and phone are on the same switch with different VLAN). After the test call I checked the destination folder on the server where recording supposed to store but see nothing there...
Not sure what I am missing - I have not seen any sync issues either, all the users are visible under QM Administrator..Any help would be apprciated...
frankly, we did not get the server based recording to work.. what we did is focus on getting the desktop recording to work..you might want to call up Cisco and they will forward you to Calabrio..they may be able to help..if i find something i will let you know..
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...