We have a h.323 gateway with 2 PRI's and any call from this PRI is handled by the Dialpeer with its configuration to throw it to the callmanager. We know that when the phones lose their contact with CCM they register with gateway. But will there be any effect when the PRI bounces in H.323 gateway since they terminate locally.
So when the phones register with the gateway the dialpeer should not come in to picture which was throwing its call to CCM. How does the Gateway stops using that dialpeer and understands that phone its there in its database.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...