Question Regarding Call transfer

[dimple mujoo]

If there is a call coming from PSTN to reception and person on reception transfers call to another person’s cell phone , the person on cell phone gets reception number instead of original calling Number.

Is it even possible to present the original calling number. Customer is having CME

C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(2)T1

Thank you

[Nadeem Ahmed]

Hello dimple

What is the exact cal-flow ?

Also can you please try configuring under telephony service
Calling-number initiator


And check if this works

Sent from Cisco Technical Support iPhone App

[dimple mujoo]

Call is coming from PSTN to a DID and being trannsfereed to PSTN number again.

Phone A 905 894 XXXX calling phone B 905 595 XXXX and from their transferred to 905 819 XXXX . the person on

905 819 XXXX gets calling number 905 595 XXXX but wants to see 905 894 XXXX instead.

[Nadeem Ahmed]

is this the topology calling from on PRI?

TELCO----PRI----->CME----PRI---TECLO

also try the method which i have suggested under Telephony-Service configuring Calling number initiator.

the calling-number       initiator can be used to preserve the caller ID of the original       calling party

Br,
Nadeem 

Please rate all useful post.

[dimple mujoo]

Sorry that didn't work.

[Nadeem Ahmed]

Can you please confirm the topology is this correct which i mentioned?

Call-flow-Topology

TELCO----PRI----->CME----PRI---TECLO

Br,
Nadeem 

Please rate all useful post.

[dimple mujoo]

yes that's right..

interface Serial0/0/0:23

no ip address

encapsulation hdlc

isdn switch-type primary-ni

isdn incoming-voice voice

isdn map address ^011* plan unknown type unknown

isdn supp-service name calling

no isdn outgoing ie redirecting-number

no cdp enable

telephony-service

max-ephones 42

max-dn 200

calling-number  initiator

transfer-system full-consult

transfer-pattern .......

transfer-pattern ..........

transfer-pattern ...........

[Nadeem Ahmed]

did you tried to enable the isdn outgoing ie redirecting-number on Serial Interface, as of now its disable.

Br,
Nadeem 

Please rate all useful post.