Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

"Allow callers to dial an extension" in CH

Hello,

I've got an autoattendant tree set up and running fine, except for one aspect. I have the "Allow callers to dial an extension during greeting" box checked, and it will allow people to dial extensions. However, Unity sends then straight to the subscriber's greeting, instead of ringing their phone through CallManager. How do I get Unity to send the call to the switch instead of keeping it and sending it to a subscriber greeting?

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions

Re: "Allow callers to dial an extension" in CH

This behavior is determined by the Call Transfer setting for the called subscriber. Go to Unity web admin > Subscirbers > Choose Subscriber > Call Transfer. Change the "Transfer incoming calls to a phone?" setting to "Yes, ring extension for". You can also do this for multiple subscribers using the Bulk Edit tool.

Hope this helps. If so, please rate the post.

Brandon

1 REPLY

Re: "Allow callers to dial an extension" in CH

This behavior is determined by the Call Transfer setting for the called subscriber. Go to Unity web admin > Subscirbers > Choose Subscriber > Call Transfer. Change the "Transfer incoming calls to a phone?" setting to "Yes, ring extension for". You can also do this for multiple subscribers using the Bulk Edit tool.

Hope this helps. If so, please rate the post.

Brandon

127
Views
5
Helpful
1
Replies