Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Re-Install the CUCM v6

Hi,

I need to re-program the cucm from the scratch.

1.What all factors I need to take in to consideration while doing this.?

2. How to back up the licenses? --- as the licence files are mising.

Faizal

1 REPLY
Cisco Employee

Re: Re-Install the CUCM v6

I'll assume you're rebuilding your publisher.  In that case you can really do anything you want during the install if you're going to be configuring it from scratch you can use any IP address or hostname you want.  If you were restoring a backup you would have to install it using the same hostname and IP address as the original or else the restore would fail.  As far as licenses if you have a backup they're backed up, but if you do not and you don't have them saved somewhere other than on the server you can open a TAC case with the licensing group and they can send you the same license files again the server already had.

146
Views
0
Helpful
1
Replies