Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Read-Only user for Unity

Hi all,

how can i make read-only user to access the unity 4.2 - the administration system

just to review.

Thanks In advance

6 REPLIES

Re: Read-Only user for Unity

In Unity admin, go to Class of Service and create a new CoS. In the new CoS, go to System Access and give it read access to administration. Then create a new subscriber and assign this CoS.

Hope this helps.

Brandon

New Member

Re: Read-Only user for Unity

Thanks to you for your help

i tried but i am facing below error :

Server.CreateObject(AvSaLocalization.AvSaLocalization.1) failed.

This is most likely an error with a DLL, probably AvSaLocalizationSvr.dll or perhaps AvSaLocaleInfoSvr.dll.

Check that these files are present, and registered with REGSVR32.

Also be sure that the appropriate MsgStoreRes.dll file is present.

Cannot continue.

(From: Global.asa: hr=0x80070005)

Re: Read-Only user for Unity

Have you tried registering the referenced DLLs using regsvr32?

Brandon

Cisco Employee

Re: Read-Only user for Unity

New Member

Re: Read-Only user for Unity

Hi ,

some thing strange happen,,

i can access the unity admin page without any authentication after i made the above procedure (Cisco Dec.)

what have i do to solve this issue,

just i need read only user

Cisco Employee

Re: Read-Only user for Unity

You'll need to specify a new Class of Service and configure the System Access portion of it for whatever you want your user to have access to.

http://www.cisco.com/en/US/customer/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag170e.html

Brad

245
Views
0
Helpful
6
Replies
CreatePlease to create content