Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Recommended DSCP signalling

Can somebody please confirm the correct DSCP value for VOIP signalling. Is it AF31 or CS3?

2 REPLIES

Re: Recommended DSCP signalling

The new recommendation is CS3. Cisco is making the move to CS3, so new devices/software releases should mark signaling traffic as CS3. Currently, not all devices have been updated, so you will run across some that still mark at AF31. This change is due to the fact that signaling packets should never be dropped and packets marked AF31 can be dropped in some situations.

Hope this helps. If so, please rate the post.

Brandon

Hall of Fame Super Silver

Re: Recommended DSCP signalling

P.S. You will be able to change the DSCP values with Unity 5.0

Chris

559
Views
4
Helpful
2
Replies
CreatePlease to create content