remote site is getting busy tone when calling trigger
we are using UCCX 5.0.2 with CUCM 6.1.2.
Trigger is working ok when dialing locally and for those sites which are connected using Inter cluster trunk but when remote site dial it (which is hosted off the HQ), we are getting busy tone. The remote site is dialing and hitting the translation pattern which strips off the HQ location code and then add the location code for the remote site as prefix. I'm getting following error in MIVR logs "JTAPICallContact[id=108,implId=7033593/2,state=STATE_REJECTED_IDX,inbound=true,App name=TEST_SCRIPT,task=null,session=42000000115,seq num=0,cn=79100,dn=79100,cgn=14778,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=79100,route=RP[num=79100],TP=null at Fri Nov 21 09:56:14 EST 2008,Queue Time=5000
71677: Nov 21 09:56:19.831 EST %MIVR-SS_CM-7-UNK:ICDContactAdapter 108 : ContactRejected received for App FW contact 108, iefSourceContact is 40588025 [7033593/2] (98)"
We are using G711 codec throughout the company so transcoding can be easily ruled out
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...