I recently set up Live Record on our Unity and Call Manager and it works real well. The only thing I need to do is eliminate the beep tone when using Live Record. I have reviewed the app notes as well as the advanced tools area on Unity and the information in the advanced tools does not match what I am viewing on the Server registry. We are running Unity 4.0(5)
Not sure what you mean by it doesn't match your server config.
If you set the LiveRecordBeepInterval value to "0" there shoul be no beep. Be aware that depending on your location it can be illegal to record phone calls without the beeps inserted in there - such legal responsibility is yours, of course, if you turn it off.
If there is no key there it'll default to beeping - if this is what you're talking about with the server config not matching, you need to use the AST tool to set the value for both LiveRecord settings.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...