Is there a way to get some reports per extension on Unity 4.0(3). the info needed would be total number of inbound calls per day for a specified extension, same for outbound calls, and let's say the average lenght of time for the calls....
Well, there's the transfer and outdial billing reports in the SA - these will give you information about notification dialouts (outbound calls) and calls transfered through the subscriber's account.
There isn't any existing report that does inbound call traffic breakdowns like that on a per subscriber basis - the port usage anaylzer does that type of thing for the server as a whole but it doesn't filter only calls to a specific subscriber.
If you have call detail reporting records being cut on your PBX or CallManager, you should be able to get the same information from those, i.e. inbound/outbound calls by extension and call duration. We are currently using an Avotus application to process the CDR records daily into reports visible from a nice GUI interface. Adhoc SQL queries can also be run for more specific information.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...