We are running Unity 4.0(5) for our Residence voicemail and have suddenly encountered a problem where when we do a password reset and save the change it looks like it took effect BUT when the student tries to log in with the new password they get the message "invalid entry, enter your password" This was working fine until a few days ago and nothing has been changed. Does anyone have any idea what is happening and why password resets suddenly stopped working.
If your password policy is set for something tough, such as non repeating passwords 341035, an admin goes in and resets the password to 12345. Then notifies the subscriber the pin has been reset to 12345, it really was not reset. Unity will accept this in the admin, but for some reason, does not always flag this as invalid pin for the tui.
Check your pin complexity settings first, then create a new pin that matches the requirments.
I have had this happen many times with newer admins.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...