cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
710
Views
0
Helpful
5
Replies

restoration of cucm 6.1 on cucm 8.6

Pawan Arora
Level 1
Level 1

Hi,

I just want to know whether can we restore the back up of CUCM 6.1 on CUCM 8.6 server or not.

Regards,

Pawan Arora

1 Accepted Solution

Accepted Solutions

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

No - DRF will only restore to the EXACT version that was backed up. E.g. you can't even back up 8.6(1) and restore to 8.6(2)...

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

5 Replies 5

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

No - DRF will only restore to the EXACT version that was backed up. E.g. you can't even back up 8.6(1) and restore to 8.6(2)...

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Do you know if there is any other procedure, in order to restore the backups files of CUCM 6.1 on CUCM 8.6 ?

Gajanan Pande
Cisco Employee
Cisco Employee

No Pawan,

While restoring a CUCM backup, the source & destination should be at exactly the same version.

GP.

Pls rate helpful posts !!

Do you know if there is any other procedure, in order to restore the backups files of CUCM 6.1 on CUCM 8.6 ?

Hi

No, there is not.

You should restore to the same version and then upgrade using the normal processes.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: