Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RightFAX

Yelp!

We are ripping out the PBX and its currently providing ISDN connectivity to our RightFax server.

Calls come into a PRI and get delivered to the Brooktrout TR1034+P4-2B from a card in the PBX.

We've ordered a BRI card for a 3845. At this point we get no connection between the server and router.

Has anyone done this before?

As an added twist, we are setting this up in Germany.

Any input greatly appreciated. We are cutting over on Friday.

Thanks!

-Erik

4 REPLIES
New Member

Re: RightFAX

A BRI crossover did the trick! 3 > 5 , 4 > 6.

Easily available if you search Cisco.com

-Erik

New Member

Re: RightFAX

Erik,

Are you taking on this RightFax project by yourself, or have you found resources to assist you? We are looking for similar resources.

Thanks,

Steve

New Member

Re: RightFAX

Hi Erik - out of curiosity what BRI card were you using?

New Member

Re: RightFAX BRI and MGCP on CUCM7.1

I have set this up sucessfully using the crossover as mentioned attached is documentation for setting up under H323.

If you are using MGCP enter the commands as detailed in the document under the BRI and also ensure you set the clocking on the E1 connected to PSTN

network-clock-participate wic 0
network-clock-select 1 E1 0/0/0.

show network-clocks

Once you have done this issue no MGCP and then MGCP.

Cheers

344
Views
5
Helpful
4
Replies