12-30-2013 02:55 PM - edited 03-19-2019 07:41 AM
CUCM 9.1.2
I am trying to get a better understanding of what happens when you add a Route Pattern. When you click save a warning pops up saying
"Any update to this Route Pattern automatically resets the associated gateway or route list."
This pattern is tied to a route list which is then tied to the gateway. What exactly is reset? Will this effect any current calls? How long does this reset take?
Thanks,
Alex
Solved! Go to Solution.
12-30-2013 04:33 PM
If your route patterns point to route list nothing will be affected, if you point your RP directly to GW or trunk, depending on what is connected to the GW (trunk type) calls may be interrupted. Since you should never point RPs to trunk/GW directly, this is atypically not an issue.
HTH,
Chris
12-30-2013 04:33 PM
If your route patterns point to route list nothing will be affected, if you point your RP directly to GW or trunk, depending on what is connected to the GW (trunk type) calls may be interrupted. Since you should never point RPs to trunk/GW directly, this is atypically not an issue.
HTH,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide