In the Unity OU, there is another OU called Location. This contains the addressing information that Unity needs to exchange messages with other voice messaging systems (which may or may not be Unity systems). For example, we have the Unity bridge server that works with Octel voicemail servers. On our Unity bridgehead server, the Location OU contains the location names for our Octel servers. You may be able to move it, however. I would check with TAC on this. I also found this link on Cisco - http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K21903786
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...