We have single unity server and would like to have second unity server as failover. Is there special things need to be done on first server to make primary and introduce second server as failover. I have got the failover license file.
You will install primary server with the license files you received from Cisco. Then you will install the second server with the demo license that comes with Unity server. Once both servers are independently installed as standalone Unity servers you would go to the primary server first and in Commserver folder there is a utility called FailoverConfig.exe. You would run this on primary server and then on secondary server and after this both servers should be part of the same failover pair.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...