Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Sending calls out remote router

I have CUCM 6.1 with a main office and a branch office with gateway's in each location. I would like to be able if a call for example from the main office is within the area code of the remote office that we can send the call out that router. I was wondering the best way to do this.

Thanks in advance!

2 REPLIES
Cisco Employee

Re: Sending calls out remote router

configure the route patterns to use the GWs, that's toll bypass and it's all based on route patterns and to which GW each call needs to be routed

configure 1 route pattern for main office when dialing that area code and route it to that GW

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Sending calls out remote router

I figured that was probably the best way to do it, thanks for the reply!

119
Views
0
Helpful
2
Replies
CreatePlease to create content