Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Setting 7921 Web Access on CME 4.2

I need to make changes to the 7921 wireless config, however the 7921 phones register by default with Web Access set to Read Only - can this be set to Full access in the CME config?

Yours sincerely,

Michael.

4 REPLIES
Anonymous
N/A

Re: Setting 7921 Web Access on CME 4.2

The exact string for setting the access to the Webpage of 7921G:

0

The options are:

0 = Full (Read and Configure)

1 = Disabled

2 = Read Only

New Member

Re: Setting 7921 Web Access on CME 4.2

Hi rrjoas45 - do you know any other 7921G-specific configuration options for the *.cnf.xml file? I'm trying to configure these phones for Asterisk and can't get either speed dials to load or access to the phone book using the Web Phone Book utility. Other than that the phones work perfectly.

New Member

Re: Setting 7921 Web Access on CME 4.2

Hi,

That doesn't work for me.

{7921 Feb 23 2009 13:35:55}

D/M/Y

W. Europe Standard/Daylight Time

2000

10.37.67.2

CP7921G-1.2.1

French_France

iso-8859-1

fr

France

France

0

http://10.37.67.2:80/localdirectory

http://10.37.67.2:80/CMEserverForPhone/serviceurl

0

3804

0.0.0.0

0

0

Any idea ?

Bye.

New Member

Re: Setting 7921 Web Access on CME 4.2

There are some places in the documentation where they mix small and capital letters, webAccess vs. WebAccess. Also, for CME 4.0 and above there is a command for per phone cnf files you need. A working configuration is:

ephone-template 1

service phone adminPassword cisco

service phone webAccess 0

telephony-service

cnf-file perphone

1333
Views
0
Helpful
4
Replies
CreatePlease login to create content