Currently setup TLS for ASA. I did follow the guide line from the pdf doc "Cisco ASA 5500 Series Confioguration Guide using the CLI" version 8.3
Base on chapter 46 (configurating Cisco Mobility Advantage). from the doc step procedure, i encoutner issue here ;
Import the Cisco UMA server certificate onto the adaptive security appliance by entering the following commands: hostname(config)# crypto ca import trustpoint pkcs12 passphrase [paste base 64 encoded pkcs12] hostname(config)# quit
I able downloaded pkcs12 cert from cuma, but when open the file with wordpad, it shown junk character. Hence not able paste to ASA. I did convert the pkcs12 file to pem, which is txt file. Paste to ASA, but shown "ERROR: Import PKCS12 operation failed". Not able to proceed.
Pls advice for those who setup TLS for ASA & cuma before. Thanks.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...