Re: Silent Monitoring/Recording with 7940 and IPCC
Just to make sure you are asking about if the monitoring/recording feature of IPCC Express/CAD will work with the older 7940 phones?
If so, then yes, you should be able to use the 7940 for monitoring and recording. I have used this capability back in CRS 4.0(1) and forward with CAD and the 7960 phones. I don't see why the 7940 would be an issue since it uses the same firmware as the 7960.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...